Lev testing equipment

A list of frequently asked LEV questions. Who can undertake the thorough examination and test and what responsibility does that person have? This sheet describes good practice for checking, maintaining and testing local exhaust ventilation ( LEV ) equipment to control gas, vapour, fume or dust. Filtermist provides comprehensive LEV testing for all makes and types of extraction equipment , working strictly in accordance with HSG2guidelines.

The Filtermist examination measures the air flow speed (velocity) of the air being extracted at the source and duct.

The are compared with the recommended .

LEV Testing Services (Local Exhaust Ventilation).

The employer must ensure that LEV equipment is . A range of analogue flow indicators for compliance to HSG2requirements. The HSG2guideline on Controlling Airborne Contaminants provides the recommended procedures to achieve these statutory requirements. These maintenance checks can be completed the same time you are having your annual LEV test. We look at your equipment that use need the extraction systems for to ensure that they are operational and in . For Low Cost extraction see our:- FumeCube Lite.

BOFA P6certified engineers carry out this examination for you to ensure that you are up to date with legislation, and all your . In the event of any failure of your equipment our . Maintenance, examination and testing of local exhaust ventilation. For the purpose of deciding the frequency of thorough examination and testing , it may be necessary in some situations to decide if an item of plant is LEV. For example: Treat parts of equipment . Scarr LEV Services are UK based and located near Doncaster, South Yorkshire. Provides guidance on buying and using local exhaust ventilation systems ( LEV ). The UK COSHH (Care of Substances Hazardous to Health) regulations 9. LEV control equipment must be teste “. In some circumstances, such as woodworking machines, the LEV may be designed as an integral part of the equipment. Therefore, although the design stage is completed.

Alarms can fail without warning and need back-up testing which should be detailed in the user. This type of testing is particularly recommended for newly installed equipment and following any major repairs.