Monday, 15 September 2014

Altronix pd8ul

VDC up to 10A (total output current should not exceed max current rating of power supply employed). Eight (8) individually fused outputs. UL Listed Power Distribution Module.


These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, .

Fused or PTC ptotected outputs.

Do not exceed total output rating of 10A per unit.

Accommodates up to 12AH Batteries. Signal Equipment” Evaluated to. For grey enclosure order model AL300ULXJG . Switch to TroveImport Configuration . PD8UL Installation Instructions IIPD8UL Rev. PD8ULCB Installation Instructions IIPD8ULCB Rev.


These units are classified as Power-Limited stand alone power supplies with stand-by battery and they are suitable to power: . These units provide non power-limited outputs: eFlow6N, eFlow6NX, eFlow6N eFlow6NX eFlow6Nand eFlow6NX16. Flow4NB, eFlow6NB, eFlow102NB or eFlow104NB. One (1) ACM4(CB), MOM PD4UL(CB), PD8UL (CB),. Genetec Synergis Cloud Link using optional GBbracket.


Altronix ACM4(CB), MOM PD4UL(CB), PD8UL (CB), PDS8(CB),. Four (4) fuse protected outputs. Up to two ( 2) ACM4(CB), MOM PD4UL(CB), PD8UL (CB), PDS8(CB), or VR6.


AL600ULPD4(CB) and AL600ULPD8(CB) are available in larger enclosure. MOMInstallation Instructions Rev. Stand-by: minutes of Stand-by at 10A. PD4UL Installation Instructions IIPD4UL Rev.


PD4ULCB Installation Instructions.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.