Sensor light manual

During the day, the built-in photocell sensor saves electricity by deactivating the floodlight. Time and Lite adjustment functions let you select how long and when the light will stay on after activation. Two operation options let you choose: Automatic Operation or Manual Override.

Note: Read this entire manual before you start . Features: One adjustable floodlight - allows you to install one 150W halogen bulb and adjust it to provide the optimum lighting coverage.

Note : Read this entire manual before you start to install the system.

Please read the instructions before using the product and retain for future use.

The ZV8can be installed at various heights from 0. Manual mode only works at night because daylight returns the sensor to AUTO. Warning : If in doubt, the installation of the infrared motion sensor light should be carried out by a. Light Permanently ON ( Manual Override):. Important: loosen all lock nuts and screws on sensor and lamp holders before making any adjustments. It has the added energy savings benefit that if you forget to turn the lights OFF, the lights will turn OFF automatically if motion is not detected . With the help of detached sensor antenna, it requires very little space on the LED panel and gives pre-selected constant current to drive the LEDs to work based on movement detection.

After the hold time, it switches off the light. It will welcome visitors and light their way or can be used to light pathways, gates or other areas where people pass through after dark. Sensor lights only illuminate when they detect motion within the sensor . Adjustable time-on range and manual override. Disassemble the PIR main body and insert the battery into the contact sensor. Make sure the device is located within the direct range of the controller.

The position can be adjusted by sliding it around the slot. LOFTer 56LED ULTRA BRIGHT MOTION SENSOR LIGHT. Recommended for College, High School, and Middle School Science.

Requires an interface and software, sold separately. The Light Sensor approximates the human eye in spectral response. Use it for inverse square law experiments or for studying polarizers, . By flipping the connected power . Keep properties well-lit and protected with security lights and LED flood lights. The unit is well recognised in the industry as being the best sensor technology available on the market today. Designed and developed in Australia, . PLEASE READ THESE INSTRUCTIONS CAREFULLY.

Have another person move across the centre of the area to be scanned and slowly adjust the “SENS” control toward maximum until. Or, enter “ Light ” into the Search window .