Monday 28 November 2016

Series motor starter

The main concept behind every DC motor starter is adding external resistance to the armature winding during starting. In order to start the motor , the spring-loaded starter handle is moved from OFF to the first stud position. At this point, the first resistor (Rabove) provides high starting resistance, as CEMF has not yet developed.


And for this particular reason the motor becomes extremely essential as starter motors for most industrial applications dealing in heavy mechanical load like huge cranes or large metal chunks etc. This limitation to the starting current of DC motor is brought about by means of the starter.

They can be operated locally or remotely by either manual or automatic pilot devices.

In series motors , a linear relationship exist between the current flowing through the field windings and the amount of torque produced.

As heavy currents flow through the very thick series field windings, large torques are produced in series motors. This feature makes series motors to be used as starter motors for industrial . Thus it is required to reduce the voltage when the motor starts . DC SERIES MOTOR STARTER ,FACTOR AFFECTING THE SPEED OF DC MOTOR. The starter also connects an electromagnet in series with the shunt field.


It will hold the arm in position when the arm makes contact with the magnet. Meanwhile , that voltage is applied to the shunt fiel and the starting resistance limits the current to the armature. Clamped EBMXS Series Explosionproof Motor Starters. DM Series motor starters are used in areas where hazardous materials are handled or stored.


These units provide disconnecting means and thermal overload protection. Starters of combustion engines are usually universal motors , with the advantage of being small and having high torque at low speed. Control circuit for forward and reverse motor - Duration: 3:11. The BMMotor Starter Series has circuit breaker and overload relay functions, meets cUL listed group installation regulations of national electrical code, and reduces the number of circuit breakers or fuses in your motor control panel.


The magnetism is created in one of three ways such as permanent magnets, series field windings or series - parallel field windings. The circuits of the latter two methods are illustrated in Fig. Only available on ANreversing starters. They are available in various control variants for rapid delivery.


Manual motor starters (MMS) : DUO series. They can also stop them, reverse them, and protect them. As the name implies, starters start motors. Contactors control the electric current to the motor. Starters are made from two building blocks , Contactors and Overload Protection.


Melvin show in the figure For Series DC Motor : the armature terminal is connected to the armature , the line terminal is connected to the. These combination and non-combination motor starters are designed for use in areas . Electrical soft starters can use solid state devices to control the current flow and therefore the voltage applied to the motor. However, there is one significant difference.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.