Thursday, 17 November 2016

Rain sensor datasheet

The rain sensor module is an easy tool for rain detection. The module features, a rain board and the control board that is separate for more convenience, power indicator LED and an adjustable sensitivity though . You must set the DIP switches so that the RG-behaves the right way for your application. The pages that follow describe each of the possible modes, and how to set the DIP switches.


Automatic Wiper Controller Using Optical.

An automatic wiper which detects raindrops with an optical rain sensor and controls the wiper interval was developed and markete.

This automatic wiper is implemented by combining an existing wiper system with .

Righ ts re serv ed for chan ge in technical data ! In that “ac- cumulation time”, the system will unnecessarily continue to water. This can look especially bad for conservation-conscious municipalities, . The large sensor area reacts to rain or snow. The polarity of the output and sensitivity are adjustable. The optional heater prevents condensation and ice forming on the detection surface, whilst aiding drying after rain or snow. At highest sensitivity the device is also suitable for detecting fog.


The heater will automatically be . Insensitive to contamination, capacitive measurement of rain and snow. Capacitive sensor which measures the change of electricity field. The FC-or YL-rain sensor is set up by two pieces: the electronic board and the collector board.


Rain sensors are designed to suspend irrigation during and after rainfall. The stand alone rain sensor automatically detects rain or snow fall and signals the ventilation control system to close open vents. The mounting bracket system has been designed such that the sensor can be mounted on to any suitable . The RL IC (Rain and Light Sensor) is intended for con- trolling an optical sensor unit in automotive wiping sys- tems.


This high-qual- ity product saves water and extends irrigation system life by automatically measuring precipi- tation and preventing irrigation systems . Rain Sensor with SBC functionality. We use the Hydreon RG-Optical rain sensor configured in tipping bucket mode to detect rain. This switch is detected by the Arduino and can be used to count the amount of rain that has fallen. Rain sensor that automatically interrupts the irrigation program when it rains and starts it again, at the set hour, when the rain has stopped.


Equipped with spike that prevents leaves from accidentally dropping onto the sensor, guaranteeing the utmost operating reliability. Easily installed outdoors on the specific steel bracket . The automatically heated surface of the sensor prevents any freezing or wetting of the sensor surface. Waterproof-encapsulated electronics. Note: The electronics of the rain sensor reacts . Our products include rain sensors and many more automation and metering products.


The unit has built-in heaters for cold weather conditions, is compact in design and uses robust composite element for rain detection. For technical details on the sensors. Two zone waterleak detection module 24V. Axio can not, however, accept .

No comments:

Post a Comment

Note: only a member of this blog may post a comment.