Radio frequency smoke detectors

Radio-interlinked smoke detectors and heat alarms are interlinked through radio - frequency signals. If one smoke alarm detects fire, all alarms go off. In the case of the battery operated radio-interlinked smoke alarms , no wiring is required at all. Please Note: These units use the radio -interlink frequency 868.

Creating an radio frequency network.

Interlinkable with up to units.

I had held some reserves on this product, worrying that other radio waves might set it off but has not caused any problems so far.

When it receives an RF signal from another Ei1Base, the attached alarm will . Increase fire safety with smoke alarms from Toolstation. Purchase smoke and heat detectors, ionisation, Aico and optical smoke alarms here. The Easy Way To Interconnect Alarms Using RadioLINK. All radio-interlinked smoke alarms : No signal cables required between the alarms.

The alarms will interlink instead with radio - frequency. RadioLINK uses Radio Frequency signals to link alarms together. An interactive review of the RadioLink Radio -Connected Smoke Alarm kit.

Find out in this video it this set is the worth the extra investment. The heat alarm in the kitchen, . The wireless interlink means that no cables are required between each alarm. Interconnected alarms provide an earlier warning and the best chance of escape, and conventionally, these have been hard wired together.

However, ever more installers are now using wire free alarm interconnection, which uses radio frequency (RF) signals instead. A radio signal is sent when the test button is presse or the alarm senses smoke. Basic wiring diagrams and tips for installing Aico Smoke and CO alarms.

Replacement smoke alarms , smoke alarm spare parts and ancillary products from EI Electronics available from Safelincs. On detection of smoke, the wireless optical smoke detector will raise two alarms. Lifeline home units and other Tunstall telecare enabled systems.

European Social Alarm Frequency. Wireless linking to Tunstall emergency equipment. The units are connected via radio frequency so if one alarm activates, all other interlinked smoke alarms will also sound.