What is ground balancing in metal detectors

We hope to clear some of it up here. Probably, each position is designed to cope with the three most likely differing ground conditions one would encounter. I expect one of them is set to balance at ferrite because that will enable the detector , like many other fixed ground . Metal detector NRG1manual ground balance.

In the location that this video was taken the ground balance was extremely high.

If you change locations, such as going from one park to .

Mystery cookie coin found at low tide metal detecting must be pirate treasure - Duration: 9:17.

Ground Millions of oxidized-iron particles in soil create a cloud that may mask the weak electromagnetic fields induced off the deep and small targets. Anyway, I set the ground balance to manual at around 5 . I feel the AT Gold will just about go into every type. A guide to ground balancing the XP Deus and understanding the discrimination. This video runs you through the basic setup involved in setting your metal detector to the correct ground balance based on the amount of metal in the soil.

As long as the signal entering the ground does NOT come in contact with metal, there will be no audio signal, no flashing light, no vibration, nothing will happen. The Gold Bug incorporates proprietary circuitry and programming to eliminate false signals from severe ground . Problem with fix ground balance in mineral ground. Unsubscribe from Regton Metal Detectors ? Adjust the ground balance of the detector. This ground balance mode may allow the detector to ground balance in areas that otherwise would have too much ground noise.

Bounty Hunter TKTracker IV Metal Detector. The reason I'm asking is my mate has the whites pi (waterproof version ) and on comparing it with his mine doesn't work as deep, iv gone over targets he's found and said we're . Given these controls, there are three different ways to get more depth: 1. Ground Balance : Different kinds of soil are packed with different levels of natural . KHZ Full Carbon Fibre Straight Stem. Part - Detech Relic Striker kHz metal detector vs small pot - depth test - Duration: 3:04. There are few different variations of ground balance on metal detectors.

Ground balance allows your detector to bypass these minerals. Automatic: many modern units have circuitry that detects and adjusts for ground effects automatically. The LCD display screen, it makes analysing what metal has been found very easy.