Wiremold floor poke thru

With 3-gangs of capacity that allow you to configure services for the needs of your space, . With 5-gangs of capacity that allow you to configure services for the needs of your space, . Step-on-it” installation makes it simple to wire connections at floor level and set the poke - thru device without special tools. UL Fire rated for up to 2-hour rated floors maintains the fire classification of the floor. TopGuard protection, an industry-leading design that meets and exceeds .

Featuring eight-gangs of capacity, redesigned and easier to use covers, recessed connections below floor level, and enough internal wiring .

Devices – Device Plate Installation.

For floor coverings greater than. Enter “ Wiremold ” as the company. These poke - thru devices provide flush device outlets that will not obstruct the floor area.

The Walker RC RC RC9AM RC RC AV and AMDdevices described shall be manufactured by The Wiremold Company. RCFlush Series on tile floor. The poke - thru device shall be compatible to . For use with the following cover assemblies ( purchased separately): 6CTC and 6CT Series.

INCLUDED: For Side Compartments: . FFATCSeries Furniture Feed Style Poke-. The abandonment plates and plugs shown in these instructions are in the UL Fire Resistance Directory. Wiremold electrical systems conform to and should be properly grounded in. The assembled Poke - Thru stem and service fitting will not reduce the ratings of the floor assembly when the thickness and type of. Wiremold RCMulti-service assembled poke - thru floor device in black color contains four prewired 20-Amps receptacles.

Duplex receptacles are pre-wired as separate circuit. It has aluminum and brass flanges with black slide cover. Brass flange comes with non-metallic brass colored slide holder. Mounting, Step On It, Retaining Clips.

Application, For Open Space Concrete Floors. The flanges use steel retaining rings that hold the unit in place after installation. If you wanted to take the poke - through out of the floor , the only way you could do it would be to remove the trim flange .