Monday 29 May 2017

Power voltage in new zealand

In New Zealand the power sockets are of type I. Please note that power outlets only accept flat three or two- pin plugs, depending on whether an earth connection is . Most hotels and motels provide 1volt ac sockets (rated at watts) for electric razors only. Every country has differing rules regarding distribution of electricity for portable appliances and lighting. The pins on New Zealand power plugs look something like this: New Zealand electrical plug.

The image below of the power outlet shows the top switch is .

Information for international travellers about power in New Zealand , including voltage , frequency and plug shape.

Finding the voltage your devices operate on. Most devices state their operating voltage near where the power cord plug. Australian outlet and power cord. More information about electricity around the world. The voltage is not exact, but the difference is usually tolerable by electrical devices.


Be extra careful with certain appliances because of the difference in frequency. Below you find pictures of the applied power sockets and corresponding plugs. And we provide more information about the voltage and . Are you planning to visit China?


The following information is for travelers living in New Zealand. Select the country you live in. On the Cook Islands the power sockets are of type I. You can use your electric appliances in Samoa, because the standard voltage (2V) is the same as in New Zealand. To be sure, check the label on the appliance. You should check the voltage capacity printed on in the manual of on even sometimes on the actual item of whatever you plan to plug into the power supply.


Low power converters are easily obtained. In Fiji the power sockets are of type I. Which power plugs and sockets in Fiji? Check out the following pictures. In Samoa the power sockets are of type I. In Tonga the power sockets are of type I. In Vanuatu the power sockets are of type I. Usually on the packing of an adaptor it will tell you which parts of the world they are for.


The International Electrotechnical Commission (IEC) world plugs Web site calls this plug Type I. Our business and experience is in building, maintaining and operating the National Grid – the high voltage transmission lines carrying electricity throughout New Zealand.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.