Zyglo test procedure

SEMINAR PRESENTATION ON ZYGLO FLUORESCENT PENETRANT TEST SUBMITTED TO: MR. INTRODUCTION It is simple,reliable and economical testing method of NDT , that helps to . DO NOT apply cleaner directly onto the part or test area. Penetrant options: SKL-SP ZL-27A, or ZL-37.

LTI) by certified NDT technicians.

Both fluorescent penetrant inspection and visible dye liquid penetrant testing are performed on products up to ft.

Water- washable and post-emulsifiable fluorescent penetrants in sensitivity levels .

This is because of the nature of the fluorescent penetrant that is applied. With its brilliant yellow glow caused by its reaction with ultraviolet radiation, FPI dye sharply contrasts with the dark background. This type of inspection is for applications that require an extremely sensitive penetrant inspection method that reveals SURFACE cracks and other discontinuities in virtually any NON-POROUS material both ferrous and . Magnetic particle inspection or MPI is also called magnetic particle testing (MP) or magnaflux . Learn more about penetrant inspection products from Magnaflux for fluorescent or dye penetrant testing method of non-destructive testing. Zyglo is synonymous with the testing of critical components, in the aerospace, automotive and ceramic industries.

Later largely replaced by magnetic particle inspection. Magnaflux in Chicago and Switzer in Cleveland performed early research in PT. Used on glazed pottery to check for cracks. Learn about NDT testing solutions from Magnaflux for liquid penetrant inspection, magnetic particle inspection and more NDE inspections.

When using solvent remover and lint-free cloth it is important to not spray the solvent on the test surface directly, because this can remove the penetrant from the flaws. An industry standard for decades, liquid penetrant testing —also known as zyglo testing , PT services, fluorescent testing , or dye penetrant testing —remains one of the most reliable, efficient, and cost-effective nondestructive methods for detecting surface flaws in non-porous metals. SPOTCHECK kits are easily transporte . The most economical removal method. Highly procedure dependent since over-washing can occur.

Fluorescent penetrant water washable chemical for zyglo testing fp9type1. ZYGLO is an extremely sensitive fluorescent penetrant inspection method that reveals cracks and other surface discontinuities in virtually any non-porous material. V, 60Hz, 1pH - Five (5) Stations Other Voltages Available. Non-Destructive Testing - Your Magnaflux Experts.

Three different system configurations are available. Leak testing techniques when using penetrant testing method : Observe all safety precautions when inspecting enclosed areas. Make sure there is enough ventilation when using chemicals.

If not, use self-contained breathing apparatus for oxygen source. Apply penetrant on the inside wall of the tank or area being inspected . APTA Commuter Rail Executive Committee. Key words: inspection and testing , minor derailment, roller bearings, wheel set, major derailment.