This sturdy switch is used in many industrial applications because it is easy to install, conceal and is very economical. Contact Sense RangeBreak Range. Use non-removable screws, bolts, or nuts to mount the switch and actuator. Do not over-torque mounting hardware.
Position the switch and actuator so the labels are reading in the same direction.
V, minimum switch current of 30mA.
SER— Maximum switches in series, triac output.
To achieve the optimum Series 3defeat resistant feature of the 301-BT, both the switch circuit (Circuit 1) and the tamper circuit (Circuit 2) must be connected. GE Interlogix 171-3Z switch that you are looking for at the most competitive prices possible. An optional third circuit can be provided to indicate at the panel which guard is open. The 3is the same as the 3but comes with armored cable for applications where unprotected cable wires could be damaged . Keep the switch and actuator within the listed sense range.
Sentrol 3Series Interlock GuardSwitches . To determine the optimum sense range, shown under the. GE Security Industrial reserves the right to change specifications without notice. The switch operating shaft is designed to be in line with the . Load Rating Switching Voltage Switching Current. Mount the actuator on the movable guard , door, or gate.
BT GuardSwitch Explosion Proof. UL Enclosure Classified for Use. Safety Standard for the Highest. Surges from coils, motors, contactors, solenoids and tungsten filaments.
Transient protection, such as . Products include: fire alarm control. It is an economical sensor often .
No comments:
Post a Comment
Note: only a member of this blog may post a comment.