Pir sensor cover

Made in 3D printing technology. The diameter of the mounting holes: mm. This unit is IPRated so it can be used outdoors, however if direct rain or water falls then this unit will fail as IPmeans Splashes of water so if you live in are where there is lot of rain this is not suitable unless you put under roof or some sort of cover on top or install . PIR Motion sensor switch - BLACK.

About of these are alarm, are sensors, and are lenses.

A wide variety of pir sensor cover options are available to you, such as infrare position sensor, and speed sensor.

When the sensor is idle, both slots detect the same .

A passive infrared sensor ( PIR sensor ) is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors. It must be clear for IR light, although it can be opaque to visible light, as the PIR covers are.

Unoccupied as required by local activity . Hardwired bi-colour model with. Passive infrared ( PIR ) detector hardwired curtain detection range with antimasking. Super Multi Dimension Analysis Logic. PIR detector to cover large areas.

In addition to intrusion the wireless range also covers life safety and environmental protection. This angle can be altered by adding the lens covers that partially cover the sensor lens. The lens covers can be cut in order to alter the angle of detection . The more that is cut away, the wider the detection angle. Vertically, the maximum detection angle is always degrees.

Horizontally, the maximum detection. Reset procedure will delete all information on the Z-Wave network or Z-Wave controller , and restore the sensor to factory default settings. Make sure the sensor is connected to power source. For that reason they are commonly found in appliances and gadgets used in homes or businesses.

Honeywell IS312B Pet Tolerant Passive Infrared ( PIR ) Motion Detector with Swivel Bracket (replaces model IS215T).