2 Wire pir sensor

Wire electronic PIR activated time delay switch ensures lighting is not left on, so saves energy. Replaces existing single gang wall switch. With re-trigger function, last minute indicator and time cancellation.

Once the relay is switched OFF, the acoustic sensor remains active for another 8-10sec, to allow the relay to be re-triggered by sounds or noises into ON state within this period. Wall Mounted PIR Switch Direct replacements for existing wall switches.

Hence they are very quick and inexpensive to install.

BE180R2W No Neutral wire is needed.

The 1utilizes infra red and acoustic sensing technology to detect the presence and movement of persons. Not suitable for use with LED loads. A neutral wire may not be present in your existing switch wiring. If in doubt consult an electrician. Wall mounted PIR occupancy switch.

The WAPIR model replaces an existing wall switch – no neutral wire is needed. Surface Mount PIR Ceiling Occupancy Motion Sensor Detector Light Switch 360°. Turn clockwise the bottom-stand and take off it.

Make the power wire across the hole in the middle of bottom-stand. The unit is fitted with an internal Lux sensor which provides further energy saving potential. Euro PIR Occupancy Switch Modules.

Detection - Concealed Adjustment Spindles White. Securely fit live in and live out wires into the terminals marked Lin, Lout. Press Reset button on each PIR in the circuit. Ensure that the sensor is not adjacent to the load.

Important Please note that it is essential that the Live In wire and switch Live Out is identified prior to commencing installation. The best placement for the Lynteck TW4Additional Wired PIR Sensor is in corners of rooms an intruder would need to travel for example, a kitchen, entrance hall or landing. With the wired PIR sensor if the sensor is tampered with or the wire are cut it automatically triggers the alarm for an extra layer of security.