Monday, 5 December 2016

Multimeter operation

The most basic things we measure are . A multimeter is also great for some basic sanity checks and troubleshooting. In this tutorial we will cover measuring voltage, . Digital multimeters , DMMs have been available for very many years. Multimeters are very cheap to buy and are one of the most commonly used pieces of electronics test equipment.

Although basic operational multimeter instruction may be given when the test meter is bought, details of how to use the multimeter to test circuits and gain the maximum use from them are not always available.

The operation of an analog multimeter is quite easy.

If the meter is new then it will obviously be necessary to . Although they are very different to that much older analogue meters, their basic function is essentially the same, although using digital technology they are able to incorporate many more . It will also explain the basics of electricity and address . Even if the operating current is low and within the range of the meter fuse, the surge can be many times higher than the operating current, because the empty filter . By learning how to use this equipment, it is possible to troubleshoot controllers, solenoids, field wiring, and to verify AC and DC voltage levels. Standart of Operation ProcedureNote: This procedure is for testing for grounding of racks and parts entering thePowder Booth. Turn on your Greenlee Multimeter with your black and red probes already attached in their respective input jacks. The OL reading indicates the diode is functioning as an open. The Fluke 1True RMS Digital Multimeter is the industry standard for troubleshooting and repair of electrical and electronic systems.


Analog to digital converter because without this we are not able to convert the analog output into digital form . There are several ADC available in the market, but we mainly use Flash type ADC due to its simplicity and fastest speed. WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cover or the battery or fuse covers. This MultiMeter is designed to provide years . WARNING: READ AND UNDERSTAND THIS MANUAL BEFORE USING YOUR MULTIMETER.


FAILURE TO UNDERSTAND AND COMPLY WITH WARNINGS AND OPERATING INSTRUCTIONS. Read all these instructions before assembling, operating or maintaining this product. This manual has been compiled by Draper Tools describing the purpose for which the product has been designe and contains all the necessary information . NEVER operate the meter unless the back cover and the battery and fuse doors are in place and fastened securely.


If any abnormal readings are observe the multimeter must be checked out by an authorised technician.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.