Optional Keypad Programming: The prox. HID proximity and IEI keypad readers as well . Plus IR unit can be programmed manually using the keypad on each unit and without the. You can also download an electronic version of this manual from this site.
It is not intended for routine use and does not replace the more comprehensive information supplied in the prox.
Modem, PDA or LAN or other controller types such as the LS or prox.
You may also refer to the manual that came with the Secured Series Controller.
It also supplies procedures for installing or using . IR wireless software managed integrated access system. If you update the DTD firmware (refer to Section 5) some portions of this manual may no longer apply. NOTE: This End User Guide is designed as a “quick reference” document for Prox.
Pad end users, especially for initial installations or new users. Installation Manuals , Data Sheets, Product Specifications and User Guides for Nortek products. This page contains some of our technical printed documentation and installation manuals for IEI (International Electronics, Inc.) products, which are available for download.
By utilizing the proximity reader . Access Control Installer Guide. This manual is designed for installers of the Interna- tional Electronics prox. The device has three operating modes, Stand-Alone (see Chapter 2),.
Wiegand Front End (see Chapter 3), and Hub Front. All wiring and programming in- structions for . If you have any questions on the proxpad II card or any other IEI product, please feel free to reach out to us. All installation, setup, operational information and procedures, accompanying screen captures and other . COM port number, using the instructions above, prior to communicating to your hardware. The diagram below illustrates the method to connect the prox. RS4port of the SEG-via its RS4modular jack on.
Used to manage IEI access systems including, Max MiniMax prox. All programming options are performed using the controller keypad. The EntryProx unit can accommodate up to 0users.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.